When installing absolutely any sanitary equipment, it is necessary to seal each seam with high quality. Otherwise, the water will gradually leak out and unwanted dampness may form in a hard-to-reach place. A long process like this can lead to the fact that the wall to which the bath adjoins will begin to gradually collapse. Today, LED lighting is very popular, it can even be used in the bathroom. If you want to order LED backlight in Kyiv, we advise you to visit the site .
It is quite possible to cope with the problem of sealing the bath on their own. In order to make the joint of the bathroom and walls, it is necessary to stock up on the following accessories:
– scissors
– mastic sold in tubes
– Special laying cord
First of all, it is necessary to clean the junction of the junction of dirt and dust. The surface must be thoroughly dried. A simple household hair dryer is suitable for this.
Before sealing, the seam must be degreased. Any alcohol solution is suitable for this. N the entire length of the joint should be applied to mastic. It must be squeezed at an angle, so it will better enter the joint. The cord should be laid on top of the mastic and slightly pressed. In the event that the mastic accidentally hit any parts of the wall or bathroom, it should be removed until hardened. Hardened mastic is very difficult to remove. Such a seam will not let moisture through and will last for many years.
