This type of laying laminate is good in rooms with little space. Laminate laid diagonally will give you the opportunity to visually increase the space of the room. Let’s look at how to properly lay the laminate diagonally. First you need to check the base. We remove all visible irregularities with a spatula. The floor error should be no more than 1 mm per 2 square meters. We remove all garbage, you can do wet cleaning. Before laying the laminate along the length of the room, the substrate is laid. The joints of the substrate are glued with adhesive tape. You can start laying the laminate both from the whole strip and from the corner of the room. If the first to lay the whole strip, it is necessary to cut it on both sides at an angle of 45 degrees and attach it to the walls. In this method, the first thing to do is to fill the floor from the smaller side of the first board and only then most of the room.
Do you want to buy a new sofa for your office, but do not know where it is cheaper? Our office sofas are perfect for you. You can buy them on our website .biz at a low price.
A corner piece of laminate is cut out according to a pre-prepared cardboard template. It is cut according to all the features of the angle. You should know that the distance between the joints of the planks should be more than 40 centimeters. This type is good for small rooms, but very expensive. Since the corner is constantly cut, more material is required than with standard laminate installations.