As you know, more than one structure will not do without the foundation, the bathhouse including.To choose which is better the foundation is suitable for building a bath, you need to know exactly what material it will be built from, and soil analysis is needed. Companies that carry out the construction of baths in Ufa or any other city offer a service for calculating and planning the construction of a bath and foundation for it.
If you go to do everything yourself, then you can perform this procedure as follows. Dig a small hole at the estimated place of the building and thus the entire soil composition will be visible on the cut.
If the soil is thinned, consists of garden or forest land, in which case it is best to use a strip foundation. Also, if the soil consists mainly of clay, the belt type of foundation is also suitable. For such a foundation, the use of formwork is mandatory.
To perform this type of foundation, rubble stone, gravel or crushed stone, brick battle, reinforced concrete blocks and cement-sand screed are used. First, a trench breaks out, twenty centimeters deeper than the freezing of the soil, and then work begins on the installation of formwork and pouring the foundation.
Soil consisting of fine gravel, sand, loam or clay can hold a columnar foundation well.
For soil consisting of rocky rocks, quartz or fine sand, any type of foundation is suitable.
Recently, such a type of foundation has appeared as a screw. It was specially developed for high-voltage power lines, but was successfully mastered by builders of low-rise buildings. Well suited for areas with loose, unstable soil and high groundwater levels.
It is a structure made of a steel pipe with a sharp tip and a helical blade, which helps when digging a pile into the ground. Two people can easily install this pile. It is not necessary to dig them to the same depth. Sometimes the piles are tied together with a wooden or metal corner.